Hydromatic Effluent Pump, OSP

Hydromatic Effluent Pump, OSP

Features

  Continuous Duty Rated

  Naval Bronze model Available for Corrosion Resistance

  Carbon/Ceramic Type 21 Mechanical Shaft Seal

  Oil-filled Motor with Automatic Thermal Overload for Maximum Protection

  Upper and Lower Single-Row Ball Bearing Construction

  Piggyback Plug Available for Easy Maintenance and Replacement

Specifications

  BODY CONSTRUCTION: Class 30 Cast Iron OR Naval Bronze

  HORSEPOWER: 1/2 HP

  MAXIMUM HEAD: 25 ft. (7.6 m)

  MAXIMUM CAPACITY: 60 GPM (3.8 LPS)

  FLOW at 10' LIFT: 52 GPM

  SWITCH TYPE: Diaphragm Pressure Switch

  MINIMUM SUMP DIAMETER: Simplex: 18" Duplex: 30"

  DISCHARGE PIPE SIZE: 1-1/2" NPT (38.1 mm) OR 2" NPT (50.8 mm)

  MAXIMUM SOLIDS HANDLING SIZE: 5/8"

  AMP DRAW (full load): 9.5 on 115v / 5.2 on 230v

  CORD LENGTH: 10' SJTW (20' optional)

  VOLTAGE: Available in 115v or 230v AC, 60 Hz (Naval Bronze models in 115v only)

  MAXIMUM LIQUID TEMPERATURE: 140°F (60°C)

  MOTOR: 1/2 HP split-phase with Thermal Overload

  IMPELLER OPTIONS: Open vane Naval Bronze or Thermoplastic Vortex