Hydromatic Effluent Pump, SHEF

Hydromatic Effluent Pump, SHEF

Features

  Carbon/Ceramic Mechanical Shaft Seal

  Oil-Filled Motor With Automatic Reset Thermal Overload

  Uses Single-Row Ball-Bearing Construction

  Piggyback Plug Available for Easy Maintenance and Switch Replacement

Specifications

  BODY CONSTRUCTION: Class 30 Cast Iron and Engineered Thermoplastic

  MAXIMUM HEAD: 24 ft. (7.3 m)

  MAXIMUM CAPACITY: 44 GPM (2.8 LPS)

  FLOW at 10' LIFT: 36 GPM

  SWITCH TYPE: Wide Angle Tethered Float

  MINIMUM SUMP DIAMETER: Simplex: 18" / Duplex: 30"

  DISCHARGE PIPE SIZE: 1-1/2" to 2" NPT (model dependent)

  MAXIMUM SOLIDS HANDLING SIZE: 3/4"

  AMP DRAW (full load): See Spec Sheets (model and voltage dependent)

  CORD LENGTH: 20' SJTW

  VOLTAGE: available in 115v / 208v / 230v / 460v / 575v

  MAXIMUM LIQUID TEMPERATURE: 120°F (49°C)

  MAXIMUM (intermittent) LIQUID TEMP: 120 -140 degrees F (49 - 60degrees C)

  IMPELLER: Thermoplastic Vortex