Hydromatic Effluent Pump, SPD

Hydromatic Effluent Pump, SPD

Features

  Two (2) Carbon/Ceramic Type 21 Mechanical Seals Mounted in Tandem

  Oil-Filled Motor with Automatic Reset Thermal Overload for Maximum Protection (single-phase models)

  Upper & Lower Ball Bearing Construction

  Piggyback Plug Available for Easy Maintenance and Switch Replacement

  Optional Seal Failure Probe Warns of Seal Leak

  Capacitor Start for Increased Starting Torque (single-phase models)

Specifications

  BODY CONSTRUCTION: Class 30 Cast Iron

  HORSEPOWER: 1/2 HP

  MAXIMUM HEAD: 50 ft. (15.2 m)

  MAXIMUM CAPACITY: 112 GPM (7.1 LPS)

  FLOW at 10' LIFT: 104 GPM

  SWITCH TYPE: Diaphragm Pressure Switch

  MINIMUM SUMP DIAMETER: Simplex: 24" / Duplex: 36"

  DISCHARGE PIPE SIZE: 2" NPT (3" NPT optional)

  MAXIMUM SOLIDS HANDLING SIZE: 3/4"

  AMP DRAW (full load): 14 amps on 115v / 7 amps on 230v 1-phase / 3.6 amps on 208v / 3.5 amps on 230v 3-phase / 1.8 amps on 460v / 1.9 amps on 575v

  CORD LENGTH: 20'

  VOLTAGE: Available in 115v or 208v 1-phase, OR 230v, 460v, or 575v 3-phase 60 Hz

  MAXIMUM LIQUID TEMPERATURE: 140°F (60°C)

  IMPELLER CONSTRUCTION: Class 30 Cast Iron, 2-vane