Myers Effluent Pump, ME4

Myers Effluent Pump, ME4

Features

  Construction – Heavy-duty cast iron motor housing and upper volute. Corrosion-resistant composite base ideal for effluent applications.

  Bearings and Mechanical Seal –Permanently lubricated for long life.

  Cord Seal – Prevents oil loss from and protection for motor if cord is damaged.

  Overload Protection – Built-in thermal overload with automatic reset.

  Intake – Built-in suction screen.

Specifications

  Applications: Septic Tank Effluent Removal, Sump Drainage, and Circulation

  Capacities: 62 GPM 235 LPM

  Shut-off head: 32’ 9.8 m

  Operation: Tethered: On: 14” 355.6 mm | Off: 5” 127.0 mm

  Solids handling: 1/2” spherical capability 12.7 mm

  Intermittent liquid temp: 130°F 55°C

  Motor: 4/10 HP, 1550 RPM, 115 Volt, 60 Hz. Class B insulation. Oil-filled shaded pole containing built-in thermal overload protection with automatic reset.

  Electrical data: 115 V, 60 Hz, single phase

  Acceptable pH range: 6-8

  Shaft seal: Mechanical carbon/ceramic

  Motor housing: Cast iron

  Upper volute case: Thermoplastic

  Lower volute case: Thermoplastic Vortex

  Power cord: 10’ or 20’ water resistant 16-3 gauge, type SJTW-A/SJTW with integrally grounded 3-prong plug.

  Discharge, NPT: 1-1/2” 38 mm

  Min. sump diameter: Simplex 18” 457 mm | Duplex 30” 762mm