Myers Effluent Pump, ME7

Myers Effluent Pump, ME7

Features

  Bearing and Mechanical Seal – Permanently lubricated for long life.

  Overload Protection – Built-in thermal overload with automatic reset.

  Cord Design – Prevents oil loss from and moisture protection for motor.

  Serviceability – Heavy-duty lift-out ring, field serviceable.

  Solids Handling – 3/4” spherical capability.

  Stainless Steel Hardware – Allows for easy disassembly after extended service.

  Controls – Standard controls available for automatic operation.

  Float – Mechanical (non mercury).

Specifications

  Applications: Effluent and Wastewater Removal, Sump Drainage, Dewatering, Flood Control

  Capacities: 110 GPM 416 LPM

  Shut-off head: 58’ 17.7 m

  Operation: Tethered: On: 18” 459.7 mm | Off: 9” 231.1 mm

  Solids handling: 3/4” 19 mm

  Intermittent liquid temp: 130°F 54.4°C

  Motor: 1/2 HP, 3450 RPM, 115 Volt or 230 Volt, single-phase, 60 Hz. Oil-filled. Built-in thermal overload protection with automatic reset and permanent split capacitor.

  Acceptable pH range: 6-9

  Shaft seal: Type 6A or equal, Buna-N elastomers, silicon carbide sealing faces, stainless steel metal parts

  Motor housing: Cast iron

  Volute case: Cast iron

  Impeller: Cast iron Vortex

  Power cord: 20’ oil and water resistant 16-3 SJTW-A/SJTW with integrally grounded three-prong plug.

  Discharge, NPT: 2”