Myers Sewage Pump, MWS5

Myers Sewage Pump, MWS5

Features

  Solids Handling – 2” spherical capabilities.

  Overload Protection – Built-in thermal overload with automatic reset.

  Bearing and Mechanical Seal – Permanently lubricated for long life.

  Stainless Steel Hardware – Allows for easy disassembly after extended service.

  Serviceability – Heavy-duty lift-out ring.

  Controls – Standard controls available for automatic operation.

  Cord Design – In-field replaceable 50’ cord available, 115 volt only.

Specifications

  Solids handling: 2” 50.8 mm

  Intermittent liquid temp: 130°F 54.4°C

  Motor: 1/2 HP, 1550 RPM, 115 Volt or 230 Volt, single-phase, 60Hz. Oil-filled. Built-in thermal overload protection with automatic reset.

  Acceptable pH range: 5-9

  Shaft seal: Type 6A Carbon and Ceramic

  Motor housing: Cast Iron

  Volute case: Cast Iron

  Impeller: Vortex reinforced Noryl® with brass threaded insert

  Power cord: 10’ or 20’ water resistant 16-3 SJTW-A/SJTW with integrally grounded three-prong plug

  Discharge, NPT: 2"

  Operation: Tethered:: On: 16” 406.4 mm | Off: 7” 177.8 mm

  Shut-off head: 18’ 5.5 m

  Capacities: 130 GPM 492 LPM

  Applications: Sewage, Effluent and Wastewater Removal and Transfer, Sump Drainage, Dewatering, Flood Control